Have problem starting a cloning operation it just mount a recycable tape and after that it read on the tape but then it just unmount the recycable tape and tries another one without any luck. I can do restore from tapes but cloning doesnt seems to work, i have also done a cleaning tape.
The only thing i see in the log is this: 3 0 5 media 0 7 warning 0 56 \\.\Tape2 moving: fsf 179: No more data is on the tape.
C:\Documents and Settings\adm>inquire
scsidev@0.0.0:HL-DT-STCD-ROM GCR-8240N1.10|CD-ROM
scsidev@2.0.0:HP Ultrium 4-SCSI H46Z|Tape, \\.\Tape0
S/N: F09EE64000
ATNN=HP Ultrium 4-SCSI F09EE640
00
WWNN=500308C09EE64000
WWPN=500308C09EE64001
WW2N=500308C09EE64000
PORT=00000001
scsidev@2.0.1:ADIC Scalar i500 520G|Autochanger (Jukebox), \\.\Changer0
S/N: ADICA0C0108A20_LLA
ATNN=ADIC A0C0108A20_LLA
scsidev@2.1.0:HP Ultrium 4-SCSI H46Z|Tape, \\.\Tape1
S/N: F09EE64004
ATNN=HP Ultrium 4-SCSI F09EE640
04
WWNN=500308C09EE64004
WWPN=500308C09EE64005
WW2N=500308C09EE64004
PORT=00000001
scsidev@2.2.0:HP Ultrium 4-SCSI H46Z|Tape, \\.\Tape2
S/N: F09EE64090
ATNN=HP Ultrium 4-SCSI F09EE640
90
WWNN=500308C09EE64090
WWPN=500308C09EE64091
WW2N=500308C09EE64090
PORT=00000001
scsidev@10.0.1:IFT A24F-G2430 361C|Disk
S/N: 01B1F3000000004838B75C000001
WWNN=200000D02301B1F3
scsidev@10.2.0:IFT A24F-G2224-1 347B|Disk
S/N: 0DD10D4649A5B300
WWNN=200000D0230DD10D
scsidev@10.2.1:IFT A24F-G2224-1 347B|Disk
S/N: 0DD10D61D2AD1100
WWNN=200000D0230DD10D
scsidev@12.6.0E/PV 1x8 SCSI BP 1.0 |Processor
scsidev@14.57.0: RAID DummyDevice 0000|Unknown Device Type
scsidev@15.0.0ERC LD 0 PERCRAID |Disk
deamon.raw:
33526 1237828227 2 0 0 5072 4404 0 backup nsrmmd 33 Start %s, with PID %d, at HOST %s 3 20 10 nsrmmd #10 1 4 4404 12 25 backup
38752 1237828229 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Eject
67986 1237828304 2 0 0 2532 2168 0 backup nsrmmgd 50 Unloading volume `%s' from device `%s' to slot %d. 3 22 8 000452L3 21 9 \\.\Tape2 1 3 115
67985 1237828324 2 0 0 2532 2168 0 backup nsrmmgd 52 Loading volume `%s' from slot `%d' into device `%s'. 3 22 8 000447L3 1 2 61 21 9 \\.\Tape2
38752 1237828346 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 53 38337 24 %s operation in progress 1 0 12 Verify label
38752 1237828360 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Mount
38758 1237828419 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 55 \\.\Tape2 moving: fsf 39: No more data is on the tape.
38758 1237828509 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 55 \\.\Tape2 moving: fsf 39: No more data is on the tape.
38758 1237828600 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 55 \\.\Tape2 moving: fsf 39: No more data is on the tape.
42506 1237828600 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 4 info 49 64 9055 11 fsf %ld: %s 2 2 2 39 0 30 No more data is on the tape.
42506 1237828600 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 16 write completion 0 6 notice 49 55 67896 30 Writing to volume %s completed 1 22 8 000447L3
12361 1237828604 2 0 0 2676 2672 0 backup nsrd 27 %s Finished with status: %s 2 0 35 [Jukebox `Bender', operation # 30]. 0 9 succeeded
0 1237828610 2 0 0 2676 2672 0 backup nsrd 2 %s 1 0 70 Operation 31 started : Load volume `A00022L4', volume id `197022538'..
38752 1237828612 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Eject
67986 1237828680 2 0 0 2532 2168 0 backup nsrmmgd 50 Unloading volume `%s' from device `%s' to slot %d. 3 22 8 000447L3 21 9 \\.\Tape2 1 2 61
67985 1237828702 2 0 0 2532 2168 0 backup nsrmmgd 52 Loading volume `%s' from slot `%d' into device `%s'. 3 22 8 A00022L4 1 1 7 21 9 \\.\Tape2
38752 1237828726 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 53 38337 24 %s operation in progress 1 0 12 Verify label
38752 1237828741 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Mount
38758 1237828863 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 56 \\.\Tape2 moving: fsf 179: No more data is on the tape.
Has anyone any tip becouse iam out of ideas on this one, we are using NW 7.5.
The only thing i see in the log is this: 3 0 5 media 0 7 warning 0 56 \\.\Tape2 moving: fsf 179: No more data is on the tape.
C:\Documents and Settings\adm>inquire
scsidev@0.0.0:HL-DT-STCD-ROM GCR-8240N1.10|CD-ROM
scsidev@2.0.0:HP Ultrium 4-SCSI H46Z|Tape, \\.\Tape0
S/N: F09EE64000
ATNN=HP Ultrium 4-SCSI F09EE640
00
WWNN=500308C09EE64000
WWPN=500308C09EE64001
WW2N=500308C09EE64000
PORT=00000001
scsidev@2.0.1:ADIC Scalar i500 520G|Autochanger (Jukebox), \\.\Changer0
S/N: ADICA0C0108A20_LLA
ATNN=ADIC A0C0108A20_LLA
scsidev@2.1.0:HP Ultrium 4-SCSI H46Z|Tape, \\.\Tape1
S/N: F09EE64004
ATNN=HP Ultrium 4-SCSI F09EE640
04
WWNN=500308C09EE64004
WWPN=500308C09EE64005
WW2N=500308C09EE64004
PORT=00000001
scsidev@2.2.0:HP Ultrium 4-SCSI H46Z|Tape, \\.\Tape2
S/N: F09EE64090
ATNN=HP Ultrium 4-SCSI F09EE640
90
WWNN=500308C09EE64090
WWPN=500308C09EE64091
WW2N=500308C09EE64090
PORT=00000001
scsidev@10.0.1:IFT A24F-G2430 361C|Disk
S/N: 01B1F3000000004838B75C000001
WWNN=200000D02301B1F3
scsidev@10.2.0:IFT A24F-G2224-1 347B|Disk
S/N: 0DD10D4649A5B300
WWNN=200000D0230DD10D
scsidev@10.2.1:IFT A24F-G2224-1 347B|Disk
S/N: 0DD10D61D2AD1100
WWNN=200000D0230DD10D
scsidev@12.6.0E/PV 1x8 SCSI BP 1.0 |Processor
scsidev@14.57.0: RAID DummyDevice 0000|Unknown Device Type
scsidev@15.0.0ERC LD 0 PERCRAID |Disk
deamon.raw:
33526 1237828227 2 0 0 5072 4404 0 backup nsrmmd 33 Start %s, with PID %d, at HOST %s 3 20 10 nsrmmd #10 1 4 4404 12 25 backup
38752 1237828229 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Eject
67986 1237828304 2 0 0 2532 2168 0 backup nsrmmgd 50 Unloading volume `%s' from device `%s' to slot %d. 3 22 8 000452L3 21 9 \\.\Tape2 1 3 115
67985 1237828324 2 0 0 2532 2168 0 backup nsrmmgd 52 Loading volume `%s' from slot `%d' into device `%s'. 3 22 8 000447L3 1 2 61 21 9 \\.\Tape2
38752 1237828346 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 53 38337 24 %s operation in progress 1 0 12 Verify label
38752 1237828360 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Mount
38758 1237828419 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 55 \\.\Tape2 moving: fsf 39: No more data is on the tape.
38758 1237828509 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 55 \\.\Tape2 moving: fsf 39: No more data is on the tape.
38758 1237828600 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 55 \\.\Tape2 moving: fsf 39: No more data is on the tape.
42506 1237828600 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 4 info 49 64 9055 11 fsf %ld: %s 2 2 2 39 0 30 No more data is on the tape.
42506 1237828600 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 16 write completion 0 6 notice 49 55 67896 30 Writing to volume %s completed 1 22 8 000447L3
12361 1237828604 2 0 0 2676 2672 0 backup nsrd 27 %s Finished with status: %s 2 0 35 [Jukebox `Bender', operation # 30]. 0 9 succeeded
0 1237828610 2 0 0 2676 2672 0 backup nsrd 2 %s 1 0 70 Operation 31 started : Load volume `A00022L4', volume id `197022538'..
38752 1237828612 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Eject
67986 1237828680 2 0 0 2532 2168 0 backup nsrmmgd 50 Unloading volume `%s' from device `%s' to slot %d. 3 22 8 000447L3 21 9 \\.\Tape2 1 2 61
67985 1237828702 2 0 0 2532 2168 0 backup nsrmmgd 52 Loading volume `%s' from slot `%d' into device `%s'. 3 22 8 A00022L4 1 1 7 21 9 \\.\Tape2
38752 1237828726 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 53 38337 24 %s operation in progress 1 0 12 Verify label
38752 1237828741 2 0 0 2676 2672 0 backup nsrd 5 %s %s 2 21 9 \\.\Tape2 49 45 38337 24 %s operation in progress 1 0 5 Mount
38758 1237828863 2 0 0 2676 2672 0 backup nsrd 9 %s %s: %s 3 0 5 media 0 7 warning 0 56 \\.\Tape2 moving: fsf 179: No more data is on the tape.
Has anyone any tip becouse iam out of ideas on this one, we are using NW 7.5.