PROBLEM ORIGINAL A NUMBER IN BC12

[ashora]

Hi,
I activated ORIGINAL A NUMBER as chang ADC in RODDP:
RODDP EST=ALL;
EXTERNAL DESTINATION DATA

DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
00 1 0005000000000250000001100 3 01
2 2 0005000000000250000001100 2 3
3 1 2 0005000000000250000001100 3

When an extension is diverted to an external party using External follow me and I call from public number the original A-party not showen.From internal and privat network I have not a problem.
Could anybody help me.

 

[whosrdaddy]

maybe the public network is not allowing you to show the orginal A-number. that would explain why its works from internal & private. make an ISDN trace to be sure your sending original A-number.

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[slash50]

I also need to get this function working. I have set the Md110, but still no A-Number.

 

[mundus]

If public is a AXE then the shall open for CLIP-SA - Calling LIne Presentation Special Arrangement.

 

[Mpe]

Have you changed the ADC pin for Network Affiliation, on the extensions?
I think its D10 in BC 12.

Mpe

 

[parnum]

what is shown? the diverted number or no number? have you done a trace, this will tell you what is being sent, as whosrdaddy says. this way you can stop guessing if it your problem or AXE.

best parnum

 

[dusyi]

For our market (Germany):
RODDIEST=0,ROU=1,ADC=0025000000000250000001100,srt=2;
RONDI:ROU=1,EXNOPU=1-49;
RONDI:ROU=1,EXNOPU=2-221;
RONDI:ROU=1,EXNOPU=4-XXXX;

And the provider must allow: "CLIP NO SCREENING".