Problem of outgoing call , external call, TMANI .

[OKACHA]

hello;
I have a hipath4000 in duplex with TMANI Q2327-X100 card . I have problem with outgoing call ; when I dial an external number (Ex: 0-xxxxxxxxx ) and after few second I have external line Tone (central office) and the call isn't setup. this issue is done from time to time (1 call from 3) and in all buend . this is some regen command for any help .

ADD -TACSU: 1-1-31-3, ,140,140, 0, 0, 8, 1, 1,
, 1, 0,"LIGNE STAND ",
0, 1-1-99, 2,1,EMPTY,10,
NONE, NONE, 0,EC &G711&G729AOPT,
" ", 0, GDTR,
0, , 0,Y ,TC ,TMANIMSG,
0, 3999,0,0, 1,11, 1, 0, DTMF-DTMF , 0-0 , 0,
;
REGENERATE-LDPLN:;
REGENERATE-LDPLN:;
H500: AMO LDPLN STARTED
ADD-LDPLN:LCRPATT,0,0-00-X,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
10,
,,,N;
ADD-LDPLN:LCRPATT,0,0-0-Z,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,0-1-Z,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,0-2-XXXXXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
2,
,,,N;
ADD-LDPLN:LCRPATT,0,0-3-XXXXXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
3,
,,,N;
ADD-LDPLN:LCRPATT,0,0-4-XXXXXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
4,
,,,N;
ADD-LDPLN:LCRPATT,0,0-5-XXXXXXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
5,
,,,N;
ADD-LDPLN:LCRPATT,0,0-6-XXXXXXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
6,
,,,N;
ADD-LDPLN:LCRPATT,0,0-7-XXXXXXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
7,
,,,N;
ADD-LDPLN:LCRPATT,0,0-9-Z,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
9,
10,,,N;
ADD-LDPLN:LCRPATT,0,0-XXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
1

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,60-X,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
3

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,66-XX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
33

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,70-X,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
2

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,72-X,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
4

,,,
1,
,,,N;
ADD-LDPLN:LCRPATT,0,77-XXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
100

,,,
1,
,,,N;

<DISPLAY-PTIME:TYPE=REST,DEV=TMANIMSG;
DISPLAY-PTIME:TYPE=REST,DEV=TMANIMSG;
H500: AMO PTIME STARTED
REST TIMERS:
=============

INIBLOCK: 119 DEVICE: TMANIMSG TBLK: 11
----------------------------------------------------------------
LONGTIME:
L1 = 200, L2 = 10000, L3 = 100, L4 = 400,
L5 = 400, L6 = 120, L7 = 5000,
SHORTTIME:
S1 = 40, S2 = 90, S3 = 0, S4 = 0,
S5 = 0, S6 = 0, S7 = 10, S8 = 1,
S9 = 0, S10 = 2, S11 = 2, S12 = 0,
S13 = 0, S14 = 36,
SHORT-PARA:
P1 = 16, P2 = 18, P3 = 0, P4 = 0,
P5 = 140, P6 = 0, P7 = 0, P8 = 2,
P9 = 0, P10 = 0, P11 = 0, P12 = 0,
P13 = 0, P14 = 1.

INIBLOCK: 119 DEVICE: TMANIMSG TBLK: 13
----------------------------------------------------------------
LONGTIME:
L1 = 200, L2 = 10000, L3 = 100, L4 = 400,
L5 = 400, L6 = 120, L7 = 5000,
SHORTTIME:
S1 = 40, S2 = 90, S3 = 0, S4 = 0,
S5 = 0, S6 = 0, S7 = 10, S8 = 1,
S9 = 0, S10 = 2, S11 = 2, S12 = 0,
S13 = 0, S14 = 36,
SHORT-PARA:
P1 = 16, P2 = 18, P3 = 0, P4 = 0,
P5 = 140, P6 = 97, P7 = 0, P8 = 2,
P9 = 0, P10 = 0, P11 = 0, P12 = 0,
P13 = 0, P14 = 0.

INIBLOCK: 119 DEVICE: TMANIMSG TBLK: 16
----------------------------------------------------------------
LONGTIME:
L1 = 200, L2 = 10000, L3 = 100, L4 = 400,
L5 = 400, L6 = 120, L7 = 5000,
SHORTTIME:
S1 = 40, S2 = 90, S3 = 0, S4 = 0,
S5 = 0, S6 = 0, S7 = 10, S8 = 1,
S9 = 0, S10 = 2, S11 = 2, S12 = 0,
S13 = 0, S14 = 36,
SHORT-PARA:
P1 = 16, P2 = 18, P3 = 0, P4 = 0,
P5 = 140, P6 = 64, P7 = 0, P8 = 2,
P9 = 0, P10 = 0, P11 = 0, P12 = 0,
P13 = 0, P14 = 1.

 

[masviss]

If you had written exactly what number you were dialing earlier, we would have solved this problem much earlier.

DEL-LDPLN:LCRPATT,0,,72-X;

The number of X's must be equal to the number of digits in the set.


ADD-LDPLN:LCRPATT,0,72-XXXXXXXXX,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
4

,,,
1,
,,,N;


If the number of digits is different each time then you need to write Z


ADD-LDPLN:LCRPATT,0,72-Z,
0&1&2&3&4&5&6&7&8&9&10&11&12&13&14&15,
4

,,,
1,
,,,N;

Good luck.

 

[openscape4000]

hi
please dislpay, LDAT and LODR to used.

maybe can help you, please post to me at: oepnscape4000@gmail.com

 

[hipath4k]

Dear All,

It is found that TMANI card in Hipath 4k not working properly i.e. no out going calls can be made , Port gets hangs even in healthy condition ,kindly change the P6 ( P-time) parameter.

Default Value P6= 97

Tested Value P6= 64



Regards
Hello ,You can dicuss with me for Hipath 3k and Hipath 4K