Problem Logging to 506e with Kiwi Syslogger 1

[MajesticMurray]

Hello all,

I have a 506e used in our office which I have logging to Kiwi Syslogger on a XP machine on the inside interface.

My boss wants to be able to see what http sites people are accessing. I have initally set the PIX on Syslog 7 on both inside and outside interfaces but Kiwi cant resolve outside IP address.

For example: built outbound connection 7752 for outside 213.18.249.14(unresolved)8080/ to inside 192.168.1.19(Station008)

I think the problem maybe with my PIX config, which I will happily post if necessary. Thanks in advance.

 

[AJ1982]

logging on
logging trap debugging
logging 192.168.220.32 inside

does that work?


===

Fatman Superstar (Andrew James)

CCNA,

 

[MajesticMurray]

Afraid not, I have stopped and started the Syslog services but still the same.

I have enclosed my PIX Config for Criticism

PIX Version 6.3(1)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password xxxxxxxxxxxxxxx encrypted
passwd xxxxxxxxxxxxxxxx encrypted
hostname xxxxxxxxxxxxx
domain-name xxxxxxxxxxxxxxxxxxx
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol ils 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
names
access-list acl_out permit icmp any any
access-list inside_access_in permit ip any any log 7
access-list outside_access_in permit ip any any log 7
access-list 105 deny udp any any eq netbios-ns
access-list 105 permit ip any any
access-list 105 deny udp any any eq netbios-dgm
access-list 110 permit tcp any any eq www
access-list 110 permit ip any any
pager lines 24
logging on
logging timestamp
logging trap debugging
logging host inside 192.168.1.147
icmp permit any outside
icmp permit any inside
mtu outside 1500
mtu inside 1500
ip address outside x.x.x.x 255.255.255.224
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location x.x.x.x 255.255.255.255 outside
pdm location x.x.x.x 255.255.255.255 outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 x.x.x.x-x.x.x.x
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group outside_access_in in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 217.180.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
http server enable
http x.x.x.x x.x.x.x outside
http x.x.x.x x.x.x.x inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt noproxyarp inside
telnet x.x.x.x x.x.x.x outside
telnet x.x.x.x x.x.x.x inside
telnet timeout 5
ssh x.x.x.x x.x.x.x outside
ssh timeout 5
console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
terminal width 80

 

[AJ1982]

Have u tried a route command, I assume other operations are normal.

I am using out of download kiwi syslog daemon service edition and works fine.

Ta

AJ

===

Fatman Superstar (Andrew James)

CCNA,

 

[MajesticMurray]

Ahh...I think I have found the problem.

I have changed the fixup protocol to http 8080 this has caused syslogger to start to display http pages.