problem installing signaling server in dl320 g4 1

[jmpprd]

e are trying to install the signaling server 5.0 on a dl320 g4 faced with the following problem.

this is the log file:

ProLiant System BIOS - D20 (03/10/2007)Copyright 1982, 2007 Hewlett-Packard Development Company, L.P.

2048 MB AvailableProcessor 1 initialized at 3.60 GHz/800 MHz(2MB L2)

Advanced Memory Protection Mode: Advanced ECC SupportRedundant ROM Detected -

This system contains a valid backup system ROM.<F9 = Setup>Integrated Lights-Out 2 Standard press [F8] to configure iLO 2 v1.29 Feb 28 2007 <IP unknown>SATA Option ROM ver 2.00.A10Copyright 1982, 2007. Hewlett-Packard Development Group, L.P. Port0: (Hard Disk) FB080C4080 Drive Write Cache Disabled HP Ethernet Boot Agent v8.3.9Copyright (C) 2000,2005 Hewlett-Packard Development Company, L.P.All rights reserved.Press Ctrl-S to Enter Configuration Menu ... Press "F9" key for ROM-Based Setup Utility Press "F10" key for System Maintenance Menu Press "F12" key for PXE boot For access via BIOS Serial Console Press "ESC+9" for ROM-Based Setup Utility Press "ESC+0" for System Maintenance Menu Press "ESC+@" for PXE bootAttempting Boot FromCD-ROMV1.6a++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++



Tier1 Server ID =

3, ProLiant DL320 G4

Initializing bsp drive for server type 3

Loading driver sysAtaInit

Loading driver sysSataInit

sysSataInit(0, 39, 7)

sysSataInit: creating (0, 0) = /dev/sda

Loading driver sysSatlInit

Loading driver sysMC146818Init

Loading driver sysHpDL320G4WatchdogInit























VxWorks System Boot





Copyright 1984-2004 Wind River Systems, Inc.











CPU: PC PENTIUM

Version: VxWorks5.5.1

BSP version: 1.2/3

Creation date: May 23 2007, 21:39:15



/dev/sda1 /boot msdos ro,autosync

/dev/sda2 /p vfat ro,autosync

/dev/sda3 /u vfat rw,autosync

/dev/sda4 /e vfat rw,autosync

/dev/hda1 /cd0 iso9660 user,ro,noauto,changeno

warn

Mounting /cd0

Mounting /boot

Could not mount /boot

Selecting nvram file from 0 sources



Reading boot parameters from (null)

Could not read nvram file, using default boot string





Press ^B to stop auto-boot...

7 6 5 4 3 2 1 0

auto-booting...





boot device : sata=0,0

unit number : 0

processor number : 0

file name : /p/mainos.sys

flags (f) : 0x0



Attaching to disk device...

mounting /p

mount failed.



Error loading file: errno = 0xd0001.

Can't load boot file!!



can you help me ?

 

[Triton101]

When you halt autoboot Try "Boot Device : fd=0

 

[allenmac]

I would still need to specify some other boot arguments. The nvram.sys file points to the mainos.sys file on the root of the CD, and this file is too large to fit on a floppy.

Also, the server does not have a floppy, and I have to enable USB support in the BIOS in order for the server to recognize my USB floppy drive. The NTPs stipulate setting Legacy USB support off.

I'm going to wait for an answer from Nortel. I will post their response when I get one.

Thanks

 

[Triton101]

Good luck.

 

[allenmac]

I spent several hours on the phone with ETAS, and the engineer finally found out that they are not going to fix the problem in 5.0 as 5.5 is coming out soon.

I was told to return the servers for replacements.

Thanks for all the input, I appreciate all of your willingness to help.