Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

problem in arrangement of 3 different DIMM 2

Status
Not open for further replies.

alexdbora

Programmer
Oct 25, 2004
25
RO

Hi there

I have Gigabyte 8I845PE-RZC

I have one 1 GB PC3200 DDR DIMM, and two 512 MB PC2700 DDR DIMM's. How
to arrange them on the 3 memory slots to have the maximum 2 GB available
for this motherboard?

I tried some configuration , but the result is only 1.5 GB!

I search in the user guide, bud I did not find a
useful information about this.

Thank you for any suggestion!

 
Hi there,
Usually the motherboards manual (downloadable in PDF format from Gigabytes website) gives all the possible ram configurations as well as recommended ram models that have been pre-tested so are sure to work.
The Trouble is Motherboards can be a bit picky with different brands and speed ratings so I am guessing yours just won't be able to work (recognise their full capacity) with all the different modules installed at the same time.
Martin


We like members to GIVE and not just TAKE.
Participate and help others.
 
Thank you for the answer.

But I didn't find such configuration in motherboard manual.
I asked directly to Gigabyte .
This is what they answered.
---
About the issue you
mentioned, with the hardware spec, it can support up to 1GB double
side+2*512MB single side memory modules to achieve 2GB in total. If you
still have hardware compatibility issues with your memory module, we
will suggest you to test with others or contact your supplier to see
whether they can help to look into this issue for you by looking at the
system.

 
Alex,
I found it hard to believe it wasn't in the manual. I took 2 minutes and found it in there as paparazi advised. Perhaps you weren't looking in the right place, but here's a link to download the manual:

On page 14, you'll see a chart showing you which DIMM slots to use for single or dual-sided modules. Even though the manual is for a GA-8I845PE-Pro, it still applies to your motherboard model too. You have the same chipset.

~cdogg
"Insanity: doing the same thing over and over again and expecting different results." - Albert Einstein
[tab][navy]For general rules and guidelines to get better answers, click here:[/navy] faq219-2884
 
Thank you.
I didn't know about this link.
It's ok now.
This is what I need.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top