I had to remove sp2 and now things are working again.
So I'm a little bit worried, because I will try again
NetWare 6.00 Directory Services Repair 10210.29, DS 10320.29
Log file for server ".NFOSLO.netware.storgata.nf" in tree "NF_TREE"
Repairing Server Network Addresses
Start: Tuesday, 3 September 2002 23.09.21 Local Time
Checking server: .NFOSLO.netware.storgata.nf
Found a Network Address Property on the server object and through DNS:
Address Type = TCP, data[6] = 192.100.22.3:524
ERROR: Adding a Network Address Property :
Address Type = IPX, data[12] = 000123450000000000010451
Address Type = TCP, data[6] = 192.100.22.3:524
Checking server address in Replica ID: 1, .[Root].
Checking server address in Replica ID: 1, .netware.storgata.nf
ERROR: Could not connect. Error : -622
The 622 normally shows when it cannot find an ipx address for a server. This is normally because it only has IP. The 622 is normal if no IPX is on the server being checked.
SP2 may upgrade you LAN drivers, try applying the sp without updating lan/disk drivers. There is an option to not do these updates when you install the SP. Lee Smith
Associated Network Services
Snr Systems Engineer
Lee.Smith@ANSPLC.Com
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.