Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem adding M3903

Status
Not open for further replies.

seanhannon

Technical User
Sep 16, 2004
1
CA

Running a Meridian Option 61C running release 25.4 software. I am attempting to upgrade a user from a M2008 to a M3903. When I out the set and copy an existing M3903 to that new DN and TN and try to upload the set, it is coming back with something like, unknown SL-1 response, or no response. And the set behaves like it's dead, except for the time displaying on it.
 
make sure your copy from tn is the correct set type and the copy to tn is vacant, to change a set type, out the original set, then do a copy from..

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top