Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Problem activating pretranslation on PBX. 1

Status
Not open for further replies.

hhallett

Technical User
Apr 30, 2003
234
US
I'm trying to program pretranslations to use on hotel guest phones. That way no one needs go room to room to reprogram autodial keys on when a hotel service's phone number changes.

I've run into a problem that I cannot find the cause to. 2 pretranslation lists are already defined but the feature isn't activated. I've added a 3rd list but, when I activate the feature in the system, the Operator consoles can't place internal calls and can place external calls without dialing "9" first.

I've deduced that pretranslation list #98 is probably assigned to the consoles. I just cannot find it in the programming for the consoles.

What I want to be able to do is to remove any pretranslation list assigned to the consoles so that I can activate the feature to use on the guest phones. If someone can point me in the right direction, please do.

My program particulars are below -

Customer Data Block:
TYPE CDB
CUST 00
DLDN YES
LDN0 1100
LDA0 ALL
LDN1 3650
LDA1 ALL
LDN2 1779
LDA2 ALL
LDA3
DGRP 1000
IRNG YES
PKND 1
NIT1 1103
TIM1
NIT2
TIM2
NIT3
TIM3
NIT4
TIM4
SPRE 4
ATDN 0
NCOS 5
CAS N
OPT LOA CTA IC1 SYA
XTG IDP XLF CFO
MCI ROI CPD IHD
DSX LRA HTU DNX
COX XBL SBA DBA
RTR RTD HVD CFRD
ACCD OVF OVF OVF ATN
CTVN OVF OVF OVF ATN
MBNR OVF OVF OVF ATN
CTRC OVF NAP OVF NAP
CLDN NAP OVF NAP NAP
NINV OVF OVF OVF ATN
NITR OVF OVF OVF ATN
NRES OVF OVF OVF ATN
NBLK OVF OVF OVF ATN
ANAT 000
ANLD 0000
AATT
RTIM 30 30 30
ATIM 0
CDR YES
IMPH NO
OMPH NO
AXID YES
TRCR YES
ECDR NO
PORT 3
ICI 00 R000
ICI 01 LD2
ICI 02 LD1
ICI 03 LD0
ICI 04 INT
ICI 05 DL0
ICI 06 DF0
ICI 07 RLL
ICI 08 MWC
ICI 09 IAT
IMS YES
IMA YES
APL NONE
UST NO
APL NONE
UMG NO
APL NONE
FLSH 45
CHLN 0
PREO 0
FCAF NO
FNAD FDN
FNAT FDN
FNAL FDN
CFN0 4
CFN1 2
CFN2 8
CFTA NO
DFN0 4
DFN1 3
DFN2 8
PHDT 30
SRCD 8888
ATAC NONE
CWUP YES
CWCL 1 2
CWTM 4 14
CWBZ YES YES
DNDL YES
DNDT ATT
DNDH YES
CCRS SRE
ECC1 UNR
ECC2 UNR
MDID YES
NDID YES
MWFB YES
MATT NO
SPVC 01
ITH1 6
ITH2 6
ITH3 6
FRRT 12
FRT 8
WAIT MUS
MURT 16
RICI 0 1 2 3 4 5
MUS YES
MUSR 16
CONG OVFL
LLT OFA
ODN0
ODN1
ODN2
ODN3
ODN4
ODN5
ODN6
ODN7
ODN8
ODN9
ASTM 30
DIND 30
DIDT 14
LDTT 6
BOTO 14
DBRC 60
NFCR YES
MAXT 10
IDCA YES
DCMX 10
EEST YES
DTMF YES
SCPL 4
VSID
GP02
GP03
GP04
GP05
GP06
GP07
GP08
GP09
GP10
GP11
GP12
GP13
GP14
GP15
AC2
ATRC YES
RANF 013
RAN1 015
RAN2
LA11
LA12
LA21
LA22
LA31
LA32
LA41
LA42
LA51
LA52
R2BN 00 00
R2ED 00 00
NRWU 5
TAWU 3


Console Print:
TN 008 0 12 00
TYPE 2250
CDEN 8D
CUST 0
SETN 008 0 12 01
CDEN 8D
ANUM 01
SSU 0006
ICDR ICDD
CPND CNDA
AADN
DNDI DNDA
LANG 00
KEY 00 BVR
01 BIN
02 ADL 5899
03 AWU
04 MIK
05 MCK
06 DDL
07 COS
08 SSC 0006
09 EES
10
11
12
13
14
15
16
17
18
19
DATE 2 MAR 2009


Pretranslation Lists:
TYPE: PRE
CUST 0
XLAT 0 99
XLAT 1 98
XLAT 2 1


Existing Pretranslation Speed Call Lists:
SCNO 0098
SCL

DNSZ 16
STOR 0 90
STOR 1 91
STOR 2 92
STOR 3 93
STOR 4 94
STOR 5 95
STOR 6 96
STOR 7 97
STOR 8 98
STOR 9 99

SCNO 0099
SCL

DNSZ 12
STOR 00
STOR 01
STOR 02
STOR 03
STOR 04
STOR 05
STOR 06
STOR 07
STOR 08
STOR 09
STOR 10
STOR 11
STOR 12
STOR 13
STOR 14
STOR 15


Added Pretranslation Speed Call List:
SCNO 0001
SCL

DNSZ 16
STOR 0
STOR 1 119
STOR 2 555
STOR 3 250
STOR 4 159
STOR 5 589
STOR 6
STOR 7 111
STOR 8 172
STOR 9 175

Regards,
Harry
"The legitimate powers of government extend to such acts only as are injurious to others. But it does me no injury for my neighbour to say there are twenty gods, or no god. It neither picks my pocket nor breaks my leg." --Thomas Jefferson
 
XLST 0 - using by trunk
XLST 1 (PRE) - using by ATT

Never use XLST 1 (Pre)to any extension, this will affect the dialing translation to ypur 2250 console.
 
LD 18
Req new
Type SCL
LSNO 240
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9

LSNO 241
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9

LSNO 242
0
1
2
3
4
5
6
7
8
9
Note:enter your dialing translation in LSNO 2

LD 18
chg
pre
XLST 0
PRE 240

XLST 1
Pre 241

XLST 2
PRE 242
end

Note: Configure guest extension with XLST 2 only and never use xlst 1 or 0



 
@ Villareal: XLST 2 is the one I'm trying to use. As you can see, I assigned LSNO 1 to XLAT 2.

Pretranslation Lists:
TYPE: PRE
CUST 0
XLAT 0 99
XLAT 1 98
XLAT 2 1

Existing Pretranslation Speed Call Lists:
SCNO 0098
SCL

DNSZ 16
STOR 0 90
STOR 1 91
STOR 2 92
STOR 3 93
STOR 4 94
STOR 5 95
STOR 6 96
STOR 7 97
STOR 8 98
STOR 9 99

SCNO 0099
SCL

DNSZ 12
STOR 00
STOR 01
STOR 02
STOR 03
STOR 04
STOR 05
STOR 06
STOR 07
STOR 08
STOR 09
STOR 10
STOR 11
STOR 12
STOR 13
STOR 14
STOR 15

Added Pretranslation Speed Call List:
SCNO 0001
SCL

DNSZ 16
STOR 0
STOR 1 119
STOR 2 555
STOR 3 250
STOR 4 159
STOR 5 589
STOR 6
STOR 7 111
STOR 8 172
STOR 9 175

I've deduced that pretranslation list #98 is probably assigned to the consoles. I just cannot find it in the programming for the consoles.

Just to reiterate, the problem arose when I activated pretranslations. They had not been in use prior to that. I have, of course, deactivated pretranslations and the consoles have worked properly since.

Still, I'll make LSNO 1 into LSNO 2xx and see if that helps.

Thank you.

Regards,
Harry
"The legitimate powers of government extend to such acts only as are injurious to others. But it does me no injury for my neighbour to say there are twenty gods, or no god. It neither picks my pocket nor breaks my leg." --Thomas Jefferson
 
xlst 1 - IS ASSIGNED TO CONSOLES (2250) BY DEFAULT. Any modification of PRE of XLST 1 will affect the Console dialing translation.

LD 18
Req: NEW
TYPE: SCL
LSNO 241
SIZE 10
STOR 0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
REQ: CHG
TYPE: PRE
XLST 1
PRE 241



Villareal
 
xlst 1 - IS ASSIGNED TO CONSOLES (2250) BY DEFAULT.
Thank you. That is something I suspected but was unable to locate in the manuals. And I see how your recommendation will correct the problem I was having with the consoles as well as allow me to assign pretranslations to the guest rooms.

Again, thank tou.

Regards,
Harry
"The legitimate powers of government extend to such acts only as are injurious to others. But it does me no injury for my neighbour to say there are twenty gods, or no god. It neither picks my pocket nor breaks my leg." --Thomas Jefferson
 
Is your BPSS in LD 15 is set to YES?if yes the first dialed digit (9) is pretranslated however, the first digit of the digits stored in the speed call list entry is not pretranslated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top