Prob with SPN 1900 2

[mcall]

I have a department that needs to call certain 1900 nums. Prob is there exists in ld90 the following spn:

SPN 19005559675
FLEN 11
ITOH NO
RLI 5
SDRR NONE
ITEI NONE

If I try to out or chg this SPN, I get error ESN115. How can I remove this spn so can create one with alow's?

 

[johnpoole]

ld 90
out
net
ac1
spn 19005559675


or just put the complete list of 900 in as new spn's.. with 11 digit routing you have complete control


john poole
bellsouth business
columbia,sc

 

[PERRYPJ]

YOU MAY HEAR FROM THE INDIVIDUAL THAT NEEDS TO DIAL THAT 900 NUMBER. I WOULD TAKE IT OUT OF THE SPN TABLE AND PLACE IT IN THE NPA TABLE, AND ONLY ALLOW THOSE 2 NUMBERS. DENY EVERYTHING ELSE. SOME ATTORNEYS AND TECH SUPPORT NUMBERS ARE 900 NUMBERS

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

my post was almost the same, adding all 1900 xxx xxxx that you need one at a time...safer

john poole
bellsouth business
columbia,sc

 

[HASAGO]

Try breaking down the full 1900 number in blocks of 4 or 3 digits like this...Documents state that this is the way it should be presented. Let me know how you go.

LD 90
OUT
NET
AC1
SPN 1900 555 9675

 

[johnpoole]

your right, i do 6 digit withen my npa, the space has to be there

john poole
bellsouth business
columbia,sc

 

[mcall]

Thanks much!! Putting space in was the answer. Curious, is there a diff between creating spn 1900 with alows and denys and creating needed 1900 numbs as NPA's. I went ahead and created them as NPA as suggested by Perrypj