Have an application that requires printing to remote printers across an Internet based VPN. If I am only going to print from Hdq. to branch printers across the VPN can I have a single public static ip address at the branch and just assign the printers a private static ip address?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Printing Across VPN
- Thread starter TMason
- Start date
Need details....
The remote printing shouldn't be a problem but it's hard to advise without details.
Our setup is as follows....
10.1.3.x <--- aDSL - IPSEC - 2mb fibre ---> 10.1.1.x
The 10.1.3.x network sends print jobs to an HP Laserjet 4050 N (w/ Jetdirect) which resides at 10.1.1.250 on a static IP.
The opposite direction is also possible.
Regards,
Jim
The remote printing shouldn't be a problem but it's hard to advise without details.
Our setup is as follows....
10.1.3.x <--- aDSL - IPSEC - 2mb fibre ---> 10.1.1.x
The 10.1.3.x network sends print jobs to an HP Laserjet 4050 N (w/ Jetdirect) which resides at 10.1.1.250 on a static IP.
The opposite direction is also possible.
Regards,
Jim
- Status
Similar threads
- Locked
- Question