Printer setup parameters in form file

[erikw9]

When trying to print from Peachtree Accounting 7.0.0.3 in Windows 2000 i recieve the following message: Warning: There was no room to store those printer setup parameters in the form file. OK or Close. The printer I am using is a Sharp AR-200. Everything works fine in Win98. What could be causing this error, and can it be fixed? Any help would be appreciated.

 

[jeggen]

I am having the exact same problem. Using PeachTree in Windows 2000 Server. Did you ever find a resolution to this?

 

[jeggen]

It seems to be an issue with the older versions of PeachTree and Windows 2000. I updated PeachTree to version 2002 and the problem was resolved.

 

[crobruncato]

I am having the same issue on XP home,peachtree accounting 2005.

Rob

 

[crobruncato]

It appears to be an issue with printers. General advice is to try generic printer drivers. This is not satisfactery, as the generic printer drivers looks like crud.

Rob

 

[cpawtc]

I am having the same problem with Peachtree Premium Accounting 2005. It only happens when I modify a standard form. If I use a standard un modified form which came with PT I do not get the error. For example, I had to modify a standard check layout to get the name and address to appear properly in the window envelope. I saved the modified form under a new name. Each time I attempt to print with the modified form I get the error.

There is another thread here which suggests when running PT on a network, to make sure that the .ini file points to the appropriate drive and folder where the form layouts that PT uses are stored. I did try that and it did not work.

wc

 

[KerryL]

I get the same error using Peachtree 2003 with XP. However, I am still able to print the checks, so the error is mostly a nuisance.

Anyone ever figure out how to get rid of it?