Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Print Unused DNs that are not consolidated

Status
Not open for further replies.

ValentiATS

Technical User
Sep 6, 2018
5
CA
Hello,

I am looking to print a list of unused DNs that are not consolidated. When using the following I get a list of unused DNs.​

prt
ludn
CUST 0
DN {enter}

All though this is nice. I find that some are them are consolidated down to 2 digits or 3 digits. Is there any way to have it print all the DNs that are not being used or is this the best that I am going to get ?

See Example:
REQ: prt
TYPE: ludn
CUST
DN

CUSTOMER 00 - UNUSED DNS:
10 401 1402 1403 1404 1405 1406 1407 1408 1409
141 142 143 144 145 146 147 148 149 1601
1602 1603 1605 1606 1607 1608 1609 161 162 163

REQ: prt
TYPE: ludn
CUST 00
DN 1441

CUSTOMER 00 - UNUSED DNS:
1441


REQ:
REQ PRT
TYPE:
TYPE LUDN
CUST 0
DN 14412

CUSTOMER 00 - UNUSED DNS:
14412

Thanks,
Valenti
 
Hi,
I think this is the way to get unused DN from the system
REQ: prt
TYPE: ludn
CUST
DN
 
No it just shows the ranges so if no "1's" in use then a LUDN of 1 would show it free. So like in your printout 10 is shown hence 1000-1099 is free.
 
What range are you looking for
usually you only require a dn in a limited range eg 1600 to 1699 or 1400 t0 1499
in that case you can put in the range after DN eg 16 or 14 .
if you leave that blank it gives all available numbers
to save space it it prints numbers like 10 meaning every number starting with 10 is available. or 401 , 141, 142 etc


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top