Print Unused DNs that are not consolidated

[ValentiATS]

Hello,

I am looking to print a list of unused DNs that are not consolidated. When using the following I get a list of unused DNs.​

prt
ludn
CUST 0
DN {enter}

All though this is nice. I find that some are them are consolidated down to 2 digits or 3 digits. Is there any way to have it print all the DNs that are not being used or is this the best that I am going to get ?

See Example:
REQ: prt
TYPE: ludn
CUST
DN

CUSTOMER 00 - UNUSED DNS:
10 401 1402 1403 1404 1405 1406 1407 1408 1409
141 142 143 144 145 146 147 148 149 1601
1602 1603 1605 1606 1607 1608 1609 161 162 163

REQ: prt
TYPE: ludn
CUST 00
DN 1441

CUSTOMER 00 - UNUSED DNS:
1441


REQ:
REQ PRT
TYPE:
TYPE LUDN
CUST 0
DN 14412

CUSTOMER 00 - UNUSED DNS:
14412

Thanks,
Valenti

 

[Ahmed_Yassine]

Hi,
I think this is the way to get unused DN from the system
REQ: prt
TYPE: ludn
CUST
DN

 

[bignose21]

No it just shows the ranges so if no "1's" in use then a LUDN of 1 would show it free. So like in your printout 10 is shown hence 1000-1099 is free.

 

[joelunchpail]

What range are you looking for
usually you only require a dn in a limited range eg 1600 to 1699 or 1400 t0 1499
in that case you can put in the range after DN eg 16 or 14 .
if you leave that blank it gives all available numbers
to save space it it prints numbers like 10 meaning every number starting with 10 is available. or 401 , 141, 142 etc