Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

print outgoing calls

Status
Not open for further replies.

medo71

Technical User
Sep 10, 2009
10
LY
hi all
we have a cs1000m in our company and we need to print out all outgoing calls
note that we have i2004
can anyone help
 
Your PBX should be capable of providing CDR records which will show the outbound calls. This is however a raw stream of data and is not easy to manipulate into a report that can easily be read. The easiest thing to do is get with a company that can convert this raw data into useable data who will then post it in a secure web site for you to download the reports.(ATCOMM is one such provider that we use) Next up, you collect it yourself and manipulate it using in house software or off the shelf software, such as the offerings from Nortel, but there are other companies out there that will supply the right software for you.
...... all it takes is money!
 
If you start looking for CA software and have a NICE budget $$$, I would recommend Microcall. If you no budget I would look at Call Account Mate. I have used them both. Microcall is the Bentley of the software line and you will pay for it. Call accounting Mate will get the job done. No bells no whistles, just a seat steering wheel and engine.
Phil
 
If you capture the CDR data to a PC it is not at all difficult to read. You can use use any word type program to search for DN's that you are looking for, or search for the actual number called, however you want to look at it. THe only cost would be the PC that stores the data, but really any older PC that will run Procomm will work.

much lower cost than any 2nd party, unless you are actually wanting to send out billing to tenants.

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 

Thank you for your expert advice

now just i need to capture the CDR data to a PC.

by which ld programm could do that and how

thanks alot
 

Use the telephony Manager in the Buffer and access section, now you'll be able to configure the option CDR, activate in the TTY you'll use USER CDR

Remember to activate de CDR in the LD 15 the Gate opener CDR and in the routes you'll be monitoring CDR YES

Hope it helps
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top