Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Prime and Control Set 1

Status
Not open for further replies.

adminkirk

Technical User
Sep 10, 2008
147
US
Hi all,

We have a new receptionist and I am in the process of moving everything over to her. I noticed within the Element Manager that all of the lines have a Prime and Control Set DN set to the old receptionist's number. What are these two settings used for?

Thanks!
 
Prime set determines where the line rings in the absence of any line assignments, if programmed to use the prime set.

Control DN determines which set is allowed to put a line in anything other than normal mode (service mode) for ringing, restrictions, or routing.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top