To Program Lines as DDI
Trans/PGM 140, CO Line Range – Dial digit 2 for DDI (DID), then Hold/Save
To Set DDI Conversion Type
Trans/PGM 145, CO Line Range, FK2 – Dial digit 2 (Use Flex DDI Table), then Hold/Save
Flex DDI Table
Trans/PGM 231, FK1 for Input, Enter last 3 digits of the DDI Number
FK1 – Name DDI, FK2 – Day Destination, FK3 – Night Destination
FK4 – Timed Ring Destination
Remember to Save your selection by pressing Hold/Save
DDI Busy/Error and No Answer Destination
Trans/PGM 167,
FK1 – Busy – Set as Required e.g. FK2 ATTD (Ring Assignment - PGM 144)
FK2 – Error – Set as Required e.g. FK2 ATTD (Ring Assignment - PGM 144)
FK3 – No Answer – Set as Required e.g. FK2 ATTD (Ring Assignment - PGM 144)
FK4 – VSF Prompts – Set as Required
FK5 – Reroute Busy - Set as Required e.g. FK2 ATTD (Ring Assignment - PGM 144)
FK6 – Reroute Error - Set as Required e.g. FK2 ATTD (Ring Assignment - PGM 144)
FK7 – Reroute No Answer - Set as Required e.g. FK2 ATTD (Ring Assignment - PGM 144)
To Program Incoming Zero Insertion (ISDN Lines)
Trans/PGM 146, CO Line Range, F12 – Dial 1 to turn ON Incoming Prefix Insertion
Trans/PGM 146, CO Line Range, F16 – Dial 0 to Set My Area Prefix Code, then Hold/Save
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.