PRI to Tandberg MXP6000 videoconf. system

[ebcbosb]

Hi.
Is there anyone who has connected a Tandberg MXP6000 to a TLU76 PRI and manage to get it working??
I have big problems to set up a call to the Tandberg. The Tandberg answers the SETUP with ALERTING. The MD110 (BC12.1) does not seem to like that.
Thanks in advance!

 

[dstrang1]

It's not the "ALERTING" message that the MD doesn't like......it's more likely information elements in the setup after that point in the call set up.

Make sure the switchtype in the config for the Tandberg and in the RODAP for the TL76 both agree.

Verify that the number assigned in the Tandberg for number range in the PRI config agrees with the number sent from the MD, and the BTON and other number formatting agree on both ends.

What is the overall end to end configuration? Do you have two Tandbergs trying to connect to each other thru the MD or are there offsite codecs trying to dial up your tandberg?

What are you using to dial toward the Tandberg when the calls fail?

FWIW, Ericsson apparently announced that they have just aquired Tandberg.

Thanks,

Dave Strang

 

[ebcbosb]

Thanks for your help. The issue is solved. We did some (telnet)adjustments in the Tandberg: Configuration ISDN PRI ChanId: On
Thats all!