PRI Settings

[archer1300]

I need the settings to connect a TN464HP to a Dialogic Diva PRI/T1-24 PCI card.

I am trying to test a fax server connection.

 

[dufus2506]

In general, when creating a PRI you want to determine which end is going to be "network" and which end will be "line-side".The PBX can emulate either network or line-side connections, but both sides have to agree.

After that, it's a matter of matching the protocol that they will use.

I'd keep it to FAS (no backup D channel) just to keep things simple.

Carpe dialem! (Seize the line!)

 

[Midstream]

Which fax server manufacturer is it? Perhaps you can find the exact integration docs you need.

 

[archer1300]

I have been looking for doc's on the internet, but have zero results.

The Fax Software Vender is: 2Point
The PRI card vendor is: Dialogic Diva
The PRI card model is: Dialogic Diva PRI/T1-24 PCI

 

[dufus2506]

Your vendor should be able to supply you with the proper settings. Unless you're building this yourself from scratch. If you are, you're pretty much on your own.

Carpe dialem! (Seize the line!)