Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI Programming MICS

Status
Not open for further replies.
jamie2

jamie2

Programmer
Jul 26, 2005
1,127
US
Where do you program the PRI on a MICS system? Particularly, where do you set either NI2 or SL1?

Thanks, mjamm
 
Sort by date Sort by votes
its under Hardware under card 1 or 2 for Module 2. You must have the PRI Enabler Installed. for SLI you must have the MCDN Keycode installed.

NTL555
 
Upvote 0 Downvote
Thanks RikRodgers and NTL555!!!!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
803
curlycord
curlycord
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N
jsaad
  • Locked
  • Question
Mics losing programming
Replies
3
Views
227
curlycord
curlycord
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
463
curlycord
curlycord
jsaad
  • Locked
  • Question
MICS GATC going dead 4
2
Replies
24
Views
772
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top