PRI NI1 or NI2 signalling-External Number display

[luddyspence]

The DID numbers are not display externally properly. The first 3 digits of the phone number is getting the info from the CLID and not being sent as the DID number. The PRI has NI1 signalling. I saw somewhere that by changing to NI2 signalling, the DID number would be sent externally. Can anyone confirm this?

 

[phonz1]

Print your CLID table and post for us, NI2 will give CLID, but it has to be changed at the CO and on your PBX, do you have a d channel?

 

[luddyspence]

Yes, I have a D-channel.

ENTRY 0
HNTN 416
ESA_HLCL
ESA_INHN NO
ESA_APDN YES
HLCL 413
DIDN YES
HLOC
LSC
CLASS_FMT DN


ENTRY 20
HNTN 416
ESA_HLCL
ESA_INHN NO
ESA_APDN NO
HLCL 972
DIDN YES
HLOC
LSC
CLASS_FMT DN

 

[phonz1]

okay, you are set up, I assume that you have the clid assigned to phones so you'll need to convert to NI2, call Telco and schedule, you'll need to reconfig your D for NI2 then....