Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI LOOP CONFIG

Status
Not open for further replies.
lanrucj

lanrucj

Technical User
Mar 8, 2009
27
0
0
US
What is the paremeter/setting on a pri/loop to determine if it is programmed to handle two way traffic?

thanks

Jim

 
Sort by date Sort by votes
The only paramter I know of to determine this in the PBX is the ICOG prompt in the route data block. Go to LD 21 and print your route data block. The ICOG prompt will be answered with either ICT (incoming only), OGT (outgoing only), or IAO (incoming and outgoing).

War Eagle!
Lions Baseball '09!
 
Upvote 0 Downvote
its says IAO thanks for the info.........
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lexer
  • Locked
  • Question
Meridian 11c and asterisk interconnection using PRI
Replies
7
Views
147
RS528
RS528
CentralJIM
  • Locked
  • Question
no caller ID on PRI external call
Replies
5
Views
139
CentralJIM
CentralJIM
telepath
  • Locked
  • Question
Lost E1 PRI link
Replies
1
Views
67
Firebird Scrambler
Firebird Scrambler
Shivrohi
  • Locked
  • Question
DCH and Loop Association
Replies
5
Views
73
Shivrohi
Shivrohi
ItTevGar
  • Locked
  • Question
Message IVD 000 OUT 00000004 0000FF65 loop
Replies
3
Views
64
Firebird Scrambler
Firebird Scrambler

Part and Inventory Search

Sponsor

Back
Top