Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI interconnection

Status
Not open for further replies.

aberin

Technical User
Feb 26, 2009
21
PH
Please help me regarding my interconnection between 2 TDE200 master and slave. when i used line in slave and im going to used CO in PRI30 it not possible when i used in LCOT its okay.. please see attachment for the connectivity. Thanks

Edmar Aberin
Philippines
 
 https://files.engineering.com/getfile.aspx?folder=758e391e-6629-44dd-b0c4-7b091f92228e&file=pri30CONNECTION.pdf
Why don't you use Q.SIG, then PRI-CPE on slave and PRI-NET on Master


Wanet Telecoms Limited
 
Check COS of Master-PRI 1 , Master-LCOT16 and Master-PRI 2.
Check 7.COS / 2.Extenal call block between TRG.
For security reasons Trunk groups are in COS7 and cant make CO-CO connection.
 
Actually the class of service is now on COS 1 in both pabx.. But still only on elcot16 can use the line. in using PRI still no dial tone or cant connect. Other suggestion..
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top