pri hunt groups

[curt2k]

ok,have a 0x32 w/6.1 t1 w/30 did's,customer wants first did 855-3100 which has an 800# going to it to have six did's
behind it or be able to rollover to next did up to 6 did's.next number 855-3107 to be setup the same way.how would i program for this to happen.
thanks in advance\curt2k

 

[luv2ski]

confused me ...do you need to have 800 # ring on 6 phones or do you want 800# to ring sequentially from 3100 to 3107...if its the second one just program a hunt group with first DID "target line" to hunt sequentially thru the 7 ext's...if its a telco thing your looking for as in if 297-3100 busy forward on busy to 297-3101 then just try the set programming ...max out trans call back and have AA as back up...or get an ACD....program main ext 3100 with 6 or 7 occurences of the target line for the latter option,,,no appearence for hunt groups"will only work if the lines do not ring on programmed sets

ONLY 17 WEEKS TILL SKI SEASON STARTS

 

[senk1s]

if the CO is programming the hunt group - 3100/3101...3105
you dont have to do anything - but assign the appropriate target lines to the sets.

being a T1 -> a call directed to 3100 can appear a max of 24 times, in that case you can program target 157 to be answered by a hunt group of 3100 thru 3105

hope this makes sense and helps

 

[mroberts]

Or if it's more simple than that and all he/she/it wants is to have DID 3100 appearing 6 times on the phone, then program the target line assigned for that DID (ie., 157)to the phone as appr&rng then press show again and change the appearances to 6.

MRoberts

http://www.a1teletronics.com