Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pri down problem

Status
Not open for further replies.

IPEXE

Technical User
Jan 15, 2012
190
IN
Hi,

I am using Siemens Hipath 3550 V7R063,from many days I am facing the problem of PRI down,When Pri get down I restarts system and it runs.I changed CPU card,PRI card but problem is as it is what can be the issue.

Thanks
 
HI astralastral

could there be a local power issue on site?

Yorkie9
 
power supply tested system stays in ideal condition but in PRI down condition when I disconect and reconect PRI it get up.another one this we replaced current epabx with new hipath 3550 and it worked well no PRI down issue found.When I reconected old Hopath 3550 raising same problem again.is i need to upgrade system software?I am going to do that.If another issue can be kindly reply as soon as.
 
its cleared.problem were due to crc4.
 
Have you tried to run head to head with your provider? It sounds like a connectivity issue with your provider. If it is the PRI will be running errors.
 
Yes but pri provider told from our side it is ok
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top