PRI change to NI2

[Garymorg]

I have a question about an option 61 with a PRI currently configured for IFC D100. I need to change the DCH 8 to NI2 and change the RDB to IFC NI2 as well.
The DCH in load 17 gives me an SCH6357 when I try to change IFC to NI2 and the RDB in ld 16 give me SCH 4775 when I try to change it to NI2.
I've looked on line and can't find either error code/
Any idea what I am missing ?
Thanks very much.
Gary

 

[bhassell2000]

you will have to out the trunks in Ld 14 then out the Rote in ld 16 then you can out or change the D Channel and rebuild

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[Garymorg]

Makes sense.
I'll give it a try.
THANKS
Gary

 

[Garymorg]

That did the trick.
Thanks very much.
Gary