PRI Caller name sending question

[peterbokunet]

Here is a log excerpt of debug on a PRI (NI-2, both sides) during the call setup.

[Apr 30 18:33:22] VERBOSE[8692] logger.c: > Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0)  0: 0  Location: User (0)
[Apr 30 18:33:22] VERBOSE[8692] logger.c: >                               Ext: 1  Progress Description: Calling equipment is non-ISDN. (3) ]
[Apr 30 18:33:22] VERBOSE[8692] logger.c: > [28 0c b1 6f 48 79 6c 4d 20 73 6f 73 65]
[Apr 30 18:33:22] VERBOSE[8692] logger.c: > Display (len=12) Charset: 31 [ Holy Moses ]
[Apr 30 18:33:22] VERBOSE[8692] logger.c: > [6c 0c 21 83 36 31 32 35 35 35 31 32 31 32]
[Apr 30 18:33:22] VERBOSE[8692] logger.c: > Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
[Apr 30 18:33:22] VERBOSE[8692] logger.c: >                           Presentation: Presentation allowed of network provided number (3)  '6125551212' ]
[Apr 30 18:33:22] VERBOSE[8692] logger.c: > [70 05 a1 34 33 32 32]
[Apr 30 18:33:22] VERBOSE[8692] logger.c: > Called Number (len= 7) [ Ext: 1  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)  '4322' ]
[Apr 30 18:33:22] VERBOSE[8692] logger.c: q931.c:2881 q931_setup: call 33152 on channel 1 enters state 1 (Call Initiated)
[Apr 30 18:33:22] VERBOSE[8692] logger.c:     -- Called g14/4322

In this call the originating number, 6125551212 is ringing through to DID 4322. Note in the message that the me is being transmitted to the Norstar. Yes, this is from 'pri intense debug' on the span.

Without changing anything on the Norstar I can plug it into a carrier and it DOES display the name on the sets. In asterisk I have to wait a second after the call setup before I get the name off the PRI with the carrier -- it's not provided in the setup.

How can I get asterisk to send the name after the setup message of outbound calls like the carrier does?

 

[johnnyasterisk]

I dont think I understand....?

Are you trying to display a word on the handsets based on the callerid or the type of call that comes in on a specific DNIS on the PRI?

 

[peterbokunet]

Just trying to get the name into the PBX.

Switching the coding from NI-2 to DMS100 (between asterisk and the PBX) fixed the issue. Not good though as I'd like to keep all the ports at NI-2.