PRI betwen MD110 and Alcatel 4400

[machtus]

I have problem with calls from Alcatel to MD. Some calls disconect. Trace from alcatel:

IE:[1e] PROGRES_ID (1=2) 81 82
IE:[4c] CONNECTED_NUMBER (1=8) -> 01 81 Num : 846100
IE:[4d] CONNECTED_SAD (1=2) ff 80



what is last message? After Alcatel send disconnect.

In trace from md short:

md: setup acknowledge
alcatel: setup acknowledge
alcatel: disconnect


Wher is problem i need help and sorry my english!
I need resolve this problem very quickli!!!

I am much obliged Machtus

 

[whosrdaddy]

lets' begin with showing some parameters :

can you provide us :

cadap;

rocap:rou=x;

rodap:rou=x;

roddp:dest=y;

where x is the route to the alcatel and y the destination to that route

http://www.damovo.com

 

[machtus]

<cadap;
CALENDAR DATA
IDENTITY=MVCR
VERSION=ASB50104/10-R6/0/1/H
08:37:51
MON 09 JUN 2003
END

<rocap:rou=60;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
60 011000000000 4 2110000001 0 30 128 01151515 111110100031 111100

END

<rodap:rou=60;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER RVA
60 SL60 H'00000300 H'10000000 H'04410000 NO H'000000

END

<roddp:dest=845;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
845 60 0646000000000250 0 1 0

END


Czech Damovo don't know

 

[MATOVTZ]

Try dial from Alcatel number in MD110 with NAME and without NAME, or change D12 in SIG:1-->0. Before 5 or 6 years I programing tie line MD110 - Acatel but work only basic call.

 

[machtus]

That i test it, but i need transmit name.