Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PRI backup to second Pri

Status
Not open for further replies.

Starc

Technical User
May 17, 2017
27
IN
Hi all,

We have one unify OS 4000 Version 8, with one E1- PRI for external pstn calling.
Now management has got one more PRI & 2 analog trunk for backup purpose.
I have configured PRI-2 also analog trunk with each having different access code as follow.


PRI 1 ( old configuration )
buend trunk group : 1 > LROUTE =1 >
Access code: 0-X > LROUTE= 1
Access code: 41-X > LROUTE= 1
----------------------------------------
PRI 2
buend trunk group : 2 > LROUTE =2 >
Access code: 42-X > LROUTE= 2

----------------------------------------
Analog trunk
buend trunk group : 3 > LROUTE =3 >
Access code: 43-X > LROUTE= 3

I need AMO to add PRI redundancy as below to 0-access code if there break down of PRI 1. Also can someone share how this can be done via Web based GUI.


PRI 1 > PRI 2 > Analog trunk
(Priority 1) (Priority 2) (Priority 3)
 
Add another route element with the second trunk group to the LRTE for dialing 0 in RICHT. You don't have to mess with digit strings just add a second trunk group to the existing entry and as far as I know it will use the first trunk group as primary and if that fails it will fall throught to the second one.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA
 
Hi
for the concern pri redundunt,

for old PRI.you need to add in richt(OLD) add-lrteext then identify the trunk group of PRI2 and analog.
then add in LDAT. thats all
 
ADD-RICHT:LRTEEXT,1,ALL,2;
ADD-RICHT:LRTEEXT,1,ALL,3;

REG-LDAT:1;

ADD-LDAT:1 - Configure same as First line of LDAT but put in BUEND as 2 and 3
So you end up with a 3 line LDAT with the lines in BUEND order of 1,2 and 3
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top