PRI backup to second Pri

[Starc]

Hi all,

We have one unify OS 4000 Version 8, with one E1- PRI for external pstn calling.
Now management has got one more PRI & 2 analog trunk for backup purpose.
I have configured PRI-2 also analog trunk with each having different access code as follow.


PRI 1 ( old configuration )
buend trunk group : 1 > LROUTE =1 >
Access code: 0-X > LROUTE= 1
Access code: 41-X > LROUTE= 1
----------------------------------------
PRI 2
buend trunk group : 2 > LROUTE =2 >
Access code: 42-X > LROUTE= 2

----------------------------------------
Analog trunk
buend trunk group : 3 > LROUTE =3 >
Access code: 43-X > LROUTE= 3

I need AMO to add PRI redundancy as below to 0-access code if there break down of PRI 1. Also can someone share how this can be done via Web based GUI.


PRI 1 > PRI 2 > Analog trunk
(Priority 1) (Priority 2) (Priority 3)

 

[donb01]

Add another route element with the second trunk group to the LRTE for dialing 0 in RICHT. You don't have to mess with digit strings just add a second trunk group to the existing entry and as far as I know it will use the first trunk group as primary and if that fails it will fall throught to the second one.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[gkreg]

Hi
for the concern pri redundunt,

for old PRI.you need to add in richt(OLD) add-lrteext then identify the trunk group of PRI2 and analog.
then add in LDAT. thats all

 

[sbcsu]

ADD-RICHT:LRTEEXT,1,ALL,2;
ADD-RICHT:LRTEEXT,1,ALL,3;

REG-LDAT:1;

ADD-LDAT:1 - Configure same as First line of LDAT but put in BUEND as 2 and 3
So you end up with a 3 line LDAT with the lines in BUEND order of 1,2 and 3