PRI and Analogue trunks on same Option 11

[luddyspence]

Can you have a PRI as well as analogue trunk cards in an Option 11?

The reason is that a client is converting an old system to an Option 11 but some users own their lines but would also like to be on the Option 11. So a PRI would be installed for most of the users and a analogue trunk card would terminate the analogue lines for these other clients.

 

[phonz1]

Sure.

 

[jjinkins]

If you are moving to an Option 11 with a PRI you can have the numbers on those individual trunks ported to your PRI as DIDs and then you won't have to worry about analog trunks.

 

[acewarlock]

Yes Porting the old numbers to a DID is the way I have always done that. If each Company is going to have a Recpt, then have the DID number for there trunks ring on her phone.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.