I have recently installed an IP403 with PRI and an analogue trunk module. Whenever I try to dial out over the analogue trunk thru the premicell I get distorted or no speech. The premicell works fine when not connected to the IPO. I have heard (can't remember where) that the IPO will not support both PRI and analogue in the same unit. I am running ver 2.0 on the IPO and have no other issues with it.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Premicell not working with PRI
- Thread starter Thermus
- Start date
- Status
Similar threads
- Locked
- Question