i purchased some pre-wired patch panels to make it easier to to add/changes etc as we have an office in a remote location. Although my vendor has tested the patch panels and the worjked ok I am getting some strange problems. when connected to a 024 card you can only use every other port on the patch panel 1, 3, 5, 7, 9 etc. when a phone is plugged into the even pair both phones power off. on a 412 I can plug in all 12 phones but when I pulg in 1 and 2 it cycles the power on the phones briefly. i thought that it may be the power supplys so I tried new ones and I still have the same problem. Does anyone have any thoughts on this?
The patch panels have an amphenol connection in the back and rj-11 jacks in the front
Thanks
The patch panels have an amphenol connection in the back and rj-11 jacks in the front
Thanks