PPTP and PIX

[bulkmail]

Hi guys,

By default, should I be able to get to a remote PPTP server with no problems? For some reason, I can connect to a remote Windows PPTP server. I can connect to it but then it disconnects me at the login process. I had a similar issue with a NS100 before but used NAT for all my internal IPs that needed access to the PPTP server. This time however, I did the same on the PIX and it still does not work. Anyone have any ideas?

Thanks,

BM

 

[gmanboston]

Make sure you have "conduit permit gre any any" in the config

 

[bulkmail]

Thanks, but i inserted "fixup protocol pptp 1723" and it worked!

BM