phoneguy04
Programmer
Anyone ever set one of these up! I need to connect to my A1 server to check the config. on an IP address for LC Win! Is there another way to do that besides doing it with this PPP link. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
PPP Link
- Thread starter phoneguy04
- Start date
- Status
The PPP link junk is for dial-up as far as I know, and I don't know of anyone in my circle of resources that has that set up. If you are going to use dial-up anyway then just dial into the number you have assigned to the CCA and connect using 115200 N 8 1 (if it's 9006.6) or 19,200 N 8 1 if it's less than 9006.6. It's best to use ProComm because the protocol best used is ANSI-BBS, and there is a special pansi3.kbd file on the 9006 utility floppy that does the keyboard mappings.
- Status
Similar threads
- Locked
- Question