Hi Everybody;
I try to install SES on 8300C.Everyting is ok except PPM.I have a message at status like :
Admin Connectivity Connected, In Service
Master Administration IP Address 192.168.0.190
Host Type home/edge
SipServer SipServer 46/46 UP SIMPLEX
PPM Status PPM is stopped
Initial Data Replication 0 updates remaining
Packets Received/Sent 22/6
SESDataService SESDataService is running...
Because of PPM is not working I couldnt use my 96XX as Avaya enviroment.
Ses version is SES-5.1.0.0-414.3c
Any ideas please...
I try to install SES on 8300C.Everyting is ok except PPM.I have a message at status like :
Admin Connectivity Connected, In Service
Master Administration IP Address 192.168.0.190
Host Type home/edge
SipServer SipServer 46/46 UP SIMPLEX
PPM Status PPM is stopped
Initial Data Replication 0 updates remaining
Packets Received/Sent 22/6
SESDataService SESDataService is running...
Because of PPM is not working I couldnt use my 96XX as Avaya enviroment.
Ses version is SES-5.1.0.0-414.3c
Any ideas please...