Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
powerpath configuration problems
- Thread starter kewitz
- Start date
- Thread starter
- #21
An agent is a part of 5.x either. The agent is a different peice of software that runs on the host.
With a FC4500 .. Heres a quick run down on how to setup.
You setup a Management server that has the management server installed on it.. That server has a navi agent pointing to both lan ports on the fc4500.
Ie.
landevice 192.168.100.65
landevice 192.168.100.66
You setup the mangement server to be a portal. Its an option in Navi under tools.
Navi 6.x doesn't have to be installed on the management server. However mine is.. So when I run navi I just login and I'm ready to go.
---
to setup hosts.
You just do the same thing..
put
device auto auto "auto"
in the agent.config file.
also add one more line.
system@management server ip.
With a FC4500 .. Heres a quick run down on how to setup.
You setup a Management server that has the management server installed on it.. That server has a navi agent pointing to both lan ports on the fc4500.
Ie.
landevice 192.168.100.65
landevice 192.168.100.66
You setup the mangement server to be a portal. Its an option in Navi under tools.
Navi 6.x doesn't have to be installed on the management server. However mine is.. So when I run navi I just login and I'm ready to go.
---
to setup hosts.
You just do the same thing..
put
device auto auto "auto"
in the agent.config file.
also add one more line.
system@management server ip.
- Thread starter
- #23
hello
i have the system running with the agent 5.2 that works ok but cant configure failover.
so my question is
1. do i need the agent of the 5.2 version or is there a new agent in the 6.x version?
2. if there is a agent in the 6.x version how do i configure the agent? i cant find the agent.config file
thx
kewitz
i have the system running with the agent 5.2 that works ok but cant configure failover.
so my question is
1. do i need the agent of the 5.2 version or is there a new agent in the 6.x version?
2. if there is a agent in the 6.x version how do i configure the agent? i cant find the agent.config file
thx
kewitz
- Thread starter
- #24
5.2 agent I don't believe will support what your trying to do.
You need host agent 6.x.
Here is a post of my agent.config file on my Management server.
this is located in:
C:\program files\EMC\Navisphere Agent\agent.config
Depending on how your explorer is setup you might not see the extention of the file. If you go to tools,folder options, view tab, uncheck the "hide file extention"
Here is my management server agent.config file.
------------------------------------------------
LastSave 3304476818
clarDescr Hidden-nt.hiddeninc.com
clarContact Admin
device auto auto "auto"
landevice 192.168.100.96 hidden-storage
landevice 192.168.100.95 hidden-storage
user system@192.168.100.10
user admin@hidden-nt
user hidden@hidden-nt
user 0@hidden-nt
user hidden@hidden-lap
poll 60
eventlog 2048
baud 9600
-------------------------------------------------
End file.
You need host agent 6.x.
Here is a post of my agent.config file on my Management server.
this is located in:
C:\program files\EMC\Navisphere Agent\agent.config
Depending on how your explorer is setup you might not see the extention of the file. If you go to tools,folder options, view tab, uncheck the "hide file extention"
Here is my management server agent.config file.
------------------------------------------------
LastSave 3304476818
clarDescr Hidden-nt.hiddeninc.com
clarContact Admin
device auto auto "auto"
landevice 192.168.100.96 hidden-storage
landevice 192.168.100.95 hidden-storage
user system@192.168.100.10
user admin@hidden-nt
user hidden@hidden-nt
user 0@hidden-nt
user hidden@hidden-lap
poll 60
eventlog 2048
baud 9600
-------------------------------------------------
End file.
- Status
Similar threads
