I have a Power Mac 7100. A user had it on its side and kicked it over. Now it won't power up. I changed the power supply but still no power. Is there a fuse or something? What am I missing?
Check to make sure all the cables are all plug in correct inside the machine!! Use the keyboard to switch on. If you can't fix it in 20 call someone who can.
Remove all drive cables (external and internal) and try to start the computer. Do you get a chime? have you reset the PRAM (hit the power key and press command + Option + P + R hold these keys down. You will hear another chime keep holding down the keys. Hold them down until after you have heard the chime 4 times)? Have you check the voltage on the battery? if the battery looks like a little AA battery the voltage 3.6 if it is a little black box with a black and red wire comming out of it it will be 4.5. If you get a chime and no video it is a dead battery if you get no chime no power indicator than you probably have a dead board (only becuase you stated you replaced the PS). Try this and let me know what happens. Once I was lost and now I am found.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.