Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Poweredge 2850 Disk Failed

Status
Not open for further replies.

mojo1979

Technical User
Nov 17, 2003
138
US
Hi,

I have a Poweredge 2850, RAID 5, with 5 disks. One of the disks is blinking amber. The server is still functional. What do I need to do? I have run the poweredge diagnostics and it reports the tests as successful. However if I go to the Openmanage Server administration it shows the fifth disk in my array as failed.

Should I try a rebuild?

Thanks in advance!!

Steve
 
Yeah first thing would be to pull the drive out and re-insert it, that should trigger an automatic rebuild. If the rebuild fails call Dell as you need a replacement drive, when that arrives just swap it with the failed one (again the rebuild should trigger automatically).
 
Hopefully you still have warranty right? or you'll have to buy that drive...

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top