Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
power up s8500
- Thread starter slammer33
- Start date
phoneguy55
Programmer
power on the G650's. Wait a few min. Power on the S8500.
- Thread starter
- #3
The G650s do not matter as to the power up/down order.
The idea behing powering them up before the server is that when CM comes online the G650's are available and no alarms are generated.
If you bring the server online first it won't be able to see the IPSI's and alarms will be generated.
This of course isn't a big deal so if you don't care then it doesn't matter what order you use.
The only suggestion I will make is if you hav4e dual power supplies in your G650's always power up the left side (facing the front of the carrier) first. Likewise power it down last.
The idea behing powering them up before the server is that when CM comes online the G650's are available and no alarms are generated.
If you bring the server online first it won't be able to see the IPSI's and alarms will be generated.
This of course isn't a big deal so if you don't care then it doesn't matter what order you use.
The only suggestion I will make is if you hav4e dual power supplies in your G650's always power up the left side (facing the front of the carrier) first. Likewise power it down last.
- Status