DaveThePhoneDoctorLV
Vendor
What is the correct power supply replacement to use for a Call Pilot 100?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Power Supply for Call Pilot
- Thread starter DaveThePhoneDoctorLV
- Start date
- Status
YankeeNation
Programmer
Power Supply 36900 Model PS20A-0801500 DC8V
Money may not buy you happiness, but in MLB it buys you CHAMPIONSHIPS. (27 and counting). MLB,stands for Major League Baseball for you slower Boston Fans!
Money may not buy you happiness, but in MLB it buys you CHAMPIONSHIPS. (27 and counting). MLB,stands for Major League Baseball for you slower Boston Fans!
- Thread starter
- #3
DaveThePhoneDoctorLV
Vendor
Thanks. Are there any AMPs that I need to that I should make sure of?
curlycord
Programmer
Make sure its 8 volt
Part # NTAB3456
9 volts were defective from the get go.
=----(((((((((()----=
curlycord
Part # NTAB3456
9 volts were defective from the get go.
=----(((((((((()----=
curlycord
- Thread starter
- #5
DaveThePhoneDoctorLV
Vendor
Did they us to use a 9 volt at one time?
curlycord
Programmer
Yes per above "from the get go" they soon replaced them with 8 volt's.
The 9 volts would stop working or even melt.
=----(((((((((()----=
curlycord
The 9 volts would stop working or even melt.
=----(((((((((()----=
curlycord
RikRodgers
Vendor
And if left to their own, would cook out the CP's with them.
- Thread starter
- #8
- Status
Similar threads