Power Cut, Reset?

[TRW95]

We had a power cut in the office and the ip ldk 20 system is now changed. The station number range is different and so is the language. Is there a way to go back or is it best to just reset the system and start again?

 

[TRW95]

Ok, so I have managed to solve everything apart from the fax machine. How do I tell it which line to dial out on, it seems to pick one (of the four) at random when before it would always use line 4?

 

[Chamvari]

you need to put the line into another group eg. group 2 under Co line attributes go to co group access pgm 117?? give un-tick everything there except group 2 or the group you have just added the co line into.


Dial Tone shoul be There

 

[Chamvari]

Go on PGM 141 change your Co line group to 2 and go to pgm 117 give the fax extension access to group 2 only un-tick all the groups which are there except group 2 . i hope you are using PC Admin

Dial Tone shoul be There

 

[jolle82]

You should check the battery on the mainboard, and solder a new one if needed. Otherwise you risk a init reset next powercut / restart. Backup first!