power alarm g3R

[wannabeaphoneman]

I replaced the batteries and thought they were the problem. After testing I find each battery is around 50 Volts DC. Upon further testing at the 250 V rectifier, I find with the batteries disconnected I read minus 35 Volts and in the two othwer cabinets I read approximately 215 volts DC with batteries disconnected. Now I need to know if my 397C power supply is bad or the 250 V rectifier is faulty. Is there a way to test either. The cabinet is still working by the luck of whatever.

 

[mikeydidit]

http://support.avaya.com/elmodocs2/definity/def_r10_new/233117_3/233117_3.pdf

page 2269

This link may help. If not post the alarms and I will help you trouble shoot this.

"You don't stop playing because you get old. You get old because you stopped playing."

For the best response to a question, read FAQ222-2244.

 

[wannabeaphoneman]

Okay the documents only tell you how to test. I fail test five error code is 8