MitelInMyBlood
Technical User
Is it possible to kill or stop an OPSMAN data restore/data convert while it's in progress? I checked the MOL resources and didn't see this mentioned.
Thanks!!
Thanks!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Possible to interrupt/kill OPSMAN auto upgrade?
- Thread starter MitelInMyBlood
- Start date
- Status
- Thread starter
- #2
MitelInMyBlood
Technical User
Answered my own question. (This is for a SX2K site)
Requires physical presence at the site.
To KILL an OPSMAN system upgrade in progress:
Simply pull the ethernet cable out of the front of the INACTIVE Main controller
Attach laptop to the MAINTENANCE port of the INACTIVE main controller
Enter the command DATA TERMINATE
Enter the command DBMS FLAG OFF
Reset the INACTIVE plane
Reconnect the Ethernet cable to the front of the main controller
Start over.
Requires physical presence at the site.
To KILL an OPSMAN system upgrade in progress:
Simply pull the ethernet cable out of the front of the INACTIVE Main controller
Attach laptop to the MAINTENANCE port of the INACTIVE main controller
Enter the command DATA TERMINATE
Enter the command DBMS FLAG OFF
Reset the INACTIVE plane
Reconnect the Ethernet cable to the front of the main controller
Start over.
- Status