Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Positioning Labels on report

Status
Not open for further replies.

WP

Programmer
Nov 30, 1999
463
CH
In VB you can use the control key to move a form control or Shift to stretch. Are there eqivalents in B.O.

Moving short measurements with the mouse can be quite cumbersome.

Thanks,

WP Bill Paton


Check out
 
Unfortunately Ctrl key is used to move the reports. Not to any cells or labels.
 
Few tips ... but not really the solution

To control position, you can use :

1. Alignment functionnalities
2. Swicthing zoom to 200 or more % to avoid "jump of mouse" during the manipulations
3. Reducing size control in place of moving is more easily (align to left and the reduce them at the right side) and can produce the same result as moving action.
4. Cell format Width and Height (by pixel) by using Format entry in the menu.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top