Good Afternoon all,
We recently changed ISPs and are currently reconfiguring our firewall. We would like to get our IP DTerms up and running again on our NEAX 2000 IPS, but I haven't been able to find the port/protocol information that will allow our IP phones to communicate with the 2000 IPS. When I go into MATWorx, it says the system is using TCP port 60000, but the IP card is using UDP 50000, TCP 06000 and 10000 RTP and has a different IP address. So what ports do I need to open/forward from the firewall?
Thanks in advance!
sax
We recently changed ISPs and are currently reconfiguring our firewall. We would like to get our IP DTerms up and running again on our NEAX 2000 IPS, but I haven't been able to find the port/protocol information that will allow our IP phones to communicate with the 2000 IPS. When I go into MATWorx, it says the system is using TCP port 60000, but the IP card is using UDP 50000, TCP 06000 and 10000 RTP and has a different IP address. So what ports do I need to open/forward from the firewall?
Thanks in advance!
sax