Before Upgrading our Unix server I loaded the new server with SCO and our app program When I first installed Openserver 5.06 on this new server (Dell PowereEdge 4600) I configured it with the IP address of 192.168.0.11 the old had 192.168.0.1 also the domain was defaulted to scosysv.uucp.com. Once I removed the old server and install the new I changed the IP to 192.168.0.1, and removed the old server from the network. I also remove the domain of uucp.com from the new server. Now I am getting a portmapper error at boot up that says WARNING: portmapper on server 213.130.63.234 is not responding. If I ping this IP it sees it as scosysv.uucp.com. I tried removing the uucp.com in netconfig and rebooting but it keeps comming back. I've read the knowledgbase docs on sco.com but nothing there has helped so far.