Portable phones

[Fish2172]

My management team has asked me to provide several folks with portable phones.

I dont have a clue as to how to direct them to transfer calls. Anyone have a moment to instruct

I know that they will be 2500 series phones. I am looking specifically on how to program the suckers for xfer and hold , etc.

 

[hawks]

Should be instructions in your Software Features Manual.

 

[Fish2172]

I take it that USCR is transfer?

 

[bassethound]

Fish, you will need to configure the FTR settings for each analog line, ISP is flash hook (very important). Then setup your SPRE codes.

 

[johnpoole]

dial the spree code then your ffc(ld 56) for the feature, as was said make sure the feature is allowed onthe portable, put a 2500 on the frame and make sure you can do it off a fixed set. the codes are different in most switches so without printing the ffc no one can give you a complete answer..

john poole
bellsouth business
columbia,sc

 

[Fish2172]

fantastic!

thanks ever so much for the heads up. I am doing this now, and will reply with how it turned out.

Fish