Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Port Network Expansion 1

Status
Not open for further replies.

telcomwork

Technical User
Mar 2, 2002
1,625
US
I ccurently have an S8710 running 1 PN with 4 cabinets. We are experiancing issues with blockage and I would like to add a gateway and split the current PN from 4 to 3 cabinets and create a new PN with 2 cabinets.

How much down time I'm I looking at?
 
You must try to plan in advance the design to minimize your downtime. Have a checklist and upgrade procedure. Try this.

1) IP assignment for IPSI's
2) Card assignment from 1C to 2A and 1D to 2B
3) IPSI cable layout to control network switch
4) Upgrade of firmware for IPSI


Items 1,2 and 3 could be done prior to activity.
This could be done in 2 hours maximum
 
Thank you. I have a vendor involved as well so it will be a joint effort so hopefully we'll be ok. Was trying to gauge a timeline from a couple people that have gone through this exercise rather than just the vendor involved.

Thanks again!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top