Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Port Fwd on PCanywhere need help!!

Status
Not open for further replies.
ikendo

ikendo

MIS
Apr 20, 2001
89
0
0
US
Hi guys,

I need your help here. It looks like pretty simple config, but I pulling my hair out on this one. I want outside to able to remote a server inside the LAN. The server running a HOST w/a ip 192.168.20.11. I post up my sh conf to guys to review.

PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password kR2PqlMuctVWaS9A encrypted
passwd kR2PqlMuctVWaS9A encrypted
hostname 560-Pix
domain-name mycompany.com
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
name xx.xx.xx.xx Outside-IP
name xx.xx.xx.xx Gateway
name 192.168.20.2 Inside-File
name xx.xx.xx.xx Outside-File
name 192.168.20.254 Inside-IP
name 192.168.20.11 pcanywhere
access-list 560-604 permit ip 192.168.20.0 255.255.255.0 192.168.10.0 255.
5.0
access-list 560-152 permit ip 192.168.20.0 255.255.255.0 192.168.30.0 255.
5.0
access-list nonat permit ip 192.168.20.0 255.255.255.0 192.168.10.0 255.25
0
access-list nonat permit ip 192.168.20.0 255.255.255.0 192.168.30.0 255.25
0
access-list inbound permit icmp any any echo-reply
access-list inbound permit tcp any host Outside-File eq 3389
access-list outbound permit ip 192.168.20.0 255.255.255.0 192.168.10.0 255
55.0
access-list outbound permit ip 192.168.20.0 255.255.255.0 192.168.30.0 255
55.0
access-list outbound deny tcp any any eq 135
access-list outbound deny tcp any any eq 445
access-list outbound permit tcp any any eq ftp
access-list outbound permit tcp any any eq ftp-data
access-list outbound permit tcp any any eq telnet
access-list outbound permit tcp any any eq smtp
access-list outbound permit tcp any any eq www
access-list outbound permit tcp any any eq pop3
access-list outbound permit tcp any any eq 3389
access-list outbound permit udp any any eq domain
access-list outbound permit tcp any any eq https
access-list outbound permit tcp any any eq citrix-ica
access-list outbound permit tcp any any eq aol
access-list outbound permit tcp any any eq 5900
access-list outbound permit tcp any any eq 4899
access-list outbound permit tcp any any eq ldap
access-list outbound permit tcp any any eq pcanywhere-data
access-list outbound permit udp any any eq pcanywhere-status
access-list outbound permit tcp any any eq 3387
access-list outbound permit tcp any any eq 3388
access-list outbound permit tcp any any eq 3101
access-list outbound permit tcp any any eq 13501
access-list outbound permit tcp any any eq 13502
access-list outbound permit tcp any any eq 13503
access-list outbound permit tcp any any eq 548
access-list outbound permit icmp any any
access-list outbound permit ip any any
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside Outside-IP 255.255.255.240
ip address inside Inside-IP 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm location 192.168.20.0 255.255.255.0 inside
pdm location Inside-File 255.255.255.255 inside
pdm location 192.168.10.0 255.255.255.0 outside
pdm location 192.168.30.0 255.255.255.0 outside
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
static (inside,outside) tcp interface pcanywhere-data pcanywhere pcanywher
netmask 255.255.255.255 0 0
static (inside,outside) tcp interface 5632 pcanywhere 5632 netmask 255.255
55 0 0
static (inside,outside) Outside-File Inside-File netmask 255.255.255.255 0
access-group inbound in interface outside
access-group outbound in interface inside
route outside 0.0.0.0 0.0.0.0 Gateway 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.20.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set Riese-tran esp-des esp-md5-hmac
crypto dynamic-map Riese-DYN 21 set transform-set Riese-tran
crypto map Roller-Map 19 ipsec-isakmp
crypto map Roller-Map 19 match address 560-152
crypto map Roller-Map 19 set peer xx.xx.xx.xxx
crypto map Roller-Map 19 set transform-set Riese-tran
crypto map Roller-Map 20 ipsec-isakmp
crypto map Roller-Map 20 match address 560-604
crypto map Roller-Map 20 set peer xx.xx.xx.xxx
crypto map Roller-Map 20 set transform-set Riese-tran
crypto map Roller-Map interface outside
isakmp enable outside
isakmp key ******** address xx.xx.xx.xxx netmask 255.255.255.255 no-xauth
fig-mode
isakmp key ******** address xx.xx.xx.xxx netmask 255.255.255.255 no-xauth
fig-mode
isakmp identity address
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption des
isakmp policy 1 hash md5
isakmp policy 1 group 2
isakmp policy 1 lifetime 64800
telnet 192.168.20.0 255.255.255.0 inside
telnet timeout 60
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 30
console timeout 0
terminal width 80
Cryptochecksum:8c1ac935d454ac42bf2bcecf8e36fd00
560-Pix#
560-Pix#
560-Pix#
 
Sort by date Sort by votes
At first glance, it appears that you have the ports wrong. You are correct with tcp 5631. You must also permit udp 5632.
 
Upvote 0 Downvote
Hi, arent this this my access list? Can you show me how how I add it in?

access-list outbound permit tcp any any eq pcanywhere-data
access-list outbound permit udp any any eq pcanywhere-status
 
Upvote 0 Downvote
Replace this:
static (inside,outside) tcp interface 5632 pcanywhere 5632 netmask 255.255
55 0 0

with this:
static (inside,outside) udp interface 5632 pcanywhere 5632 netmask 255.255
55 0 0
 
Upvote 0 Downvote
I got to work.
I needed to modify the ACL.

thanks for help Rudeboy.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Sameer258
  • Locked
  • Question
Need Help to Find ip and mac address with email who one open my email
Replies
0
Views
141
Sameer258
Sameer258
XLNTech1
  • Locked
  • Question
iptables port forwarding
Replies
0
Views
119
XLNTech1
XLNTech1
PauS0n
  • Locked
  • Question
Need Help On Cisco ASA 5512 Running Version 9
Replies
0
Views
56
PauS0n
PauS0n
intel233
  • Locked
  • Question
Cisco ASA 5510 -Static NAT Help
Replies
8
Views
157
intel233
intel233
tklamb
  • Locked
  • Question
ACL help
Replies
0
Views
45
tklamb
tklamb

Part and Inventory Search

Sponsor

Back
Top